ChuangWei تجهیزات الکترونیکی کارخانه

ما اولین کارخانه در چین است که راه حل کامل TOTAL برای کارخانه های الکترونیکی را فراهم می کند.

خانه
محصولات
دربارهی ما
کارخانه تور
کنترل کیفیت
تماس با ما
درخواست نقل قول
خانه محصولاتماشین آلات توزیع خودکار

300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas

گواهی
کیفیت خوب PCB Depaneling برای فروش
کیفیت خوب PCB Depaneling برای فروش
The router works fine. I would like to special thanks to you one more time for your support!

—— Ahmet

I was set up your machine one week ago. İt’s good working. Thank you for all.

—— Erdem

The machine operates well, we will purchase it again

—— Jon

The machine works very well, now we train all workers.

—— Michal

چت IM آنلاین در حال حاضر

300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas

چین 300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas تامین کننده
300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas تامین کننده 300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas تامین کننده

تصویر بزرگ :  300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas

جزئیات محصول:

Place of Origin: Dongguang China
نام تجاری: Chuangwei
گواهی: CE ISO
Model Number: CW 300M

پرداخت:

Minimum Order Quantity: 1 set
قیمت: Negotiable
Packaging Details: each set be packed in plywood case
Delivery Time: 1-3 days after payment confirm
Payment Terms: T/T, L/C
Supply Ability: 300 sets per months
Contact Now
توضیحات محصول جزئیات
Work areas: 19.68" x 19.68" X/Y/Z Work Area: 300/300/100 MM
Repeatability: +/- 0.01mm / axis Interpolation Function:: 3 axis
I/O Signals Port: 8 Inputs / 8 Outputs Trade Term:: EXW

 

 

300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas

 

 

Description:

 

The 300MM Stepper is our most popular industrial robot with a dispensing area of 11.81" x 11.81" (300MM X 300MM). The 300MM Cartesian robot represents a substantial cost saving in comparison to similar desktop robots. Its overall footprint has a depth of less than 26 inches (640MM), suitable for an industrial bench. This line of robots is also available with a low cost vision system.

These benchtop industrial robots are ideal for automating a current dispensing application. With the various work areas offered almost every application can be fitted on one of the models in this series; 200, 300 or 400MM Robots.

A program consists of a series of instructions stored in the main unit, each instruction stored in a numbered memory address. An address may record a point location, X, Y, and Z axis value, point type or instruction which sets a certain parameter, such as a dispensing time or line speed. 

 

Features: 

 

  • Work areas up to 19.68" x 19.68"
  • Step & Repeat function - Program one object for multiple identical objects
  • Repeatability of 0.02mm
  • High resolution 0.001mm
  • USB port allows for data transfer between PC
  • 100 Programs, 50,000 points per program
  • Continuous path motion for accurate XYZ movement
  • Teach Pendant and (optional) PC programming

 

Technical parameters:

 

  • X/Y/Z Work Area: 300/300/100 MM
  • Work Load: Table/Tool: 10 kg./5 kg.
  • Max. Speed:  X&Y/Z  800/320 (mm/sec)
  • Repeatability: +/- 0.02 mm/axis
  • Resolution: 0.001 mm/axis
  • Data Memory: 100 Programs/50,000 points per
  • Drive System: Micro stepping motor
  • Motion Control: Point to point & continuous path
  • Teaching Method: Teach Pendant
  • I/O Signals: 8 inputs/8 outputs
  • External Interface: USB/RS232
  • Power Supply: 100-240 VAC, 320W

300mm Benchtop Automated Dispensing Machines 19.68" X 19.68" Work Areas

Installation:

The automatic dispenser machine can satisfy various requirements for dispensing, only need to choose different fixtures and math with dispensing systems. 
 
The following installation instruction is based on the 30CC needle cylinder clamp and simple type dispensing system as a model. 


1. The standard accessories include the 30CC needle cylinder clamps, and they can be applied to 30CC or 55CC needle cylinder. If you want to use other needle cylinder, then you have to purchase other needle cylinder clamps appropriate. 
 
2. Fix the needle cylinder clamps onto the Z axle. Put the hexagon socket flat head screws through the holes of the clamps and then lock on the Z ground side. The clamp has a couple of holes to select, according to the specific requirements .
 
3. Connect the signal port(three holes) of the dispenser machine on the backside to the signal port in the controller with dispenser signal line. The signal port in the dispenser machine is the same one that connecting with the foot-plate. Thus a problem may appear that the port can not be shared, if your dispenser machine is not purchased along with the matching machine. In such case, please contact the Extruder supplier for joint exchanging.
 
4. Connect the compressed air source to the dispenser controller, put the needle cylinder collet onto the needle cylinder and tighten it, and put the needle cylinder into the needle cylinder clamps and lock the screws which are used to fix the needle cylinder.( Please don’t over tighten, in case of deformation. And once it deforms, the piston then cannot fit with the inner side of the needle cylinder, and cause air leakage.)
 
5. Connect the handheld programmer to the machine. 
 
6. Connect the dispenser machine and the controller to 220V power source.
 
7. Do make sure the pressure pipe of the needle cylinder collet and the power source will not influence the motion of each axles and working plate.
 
8. Congratulations for completing primary set of the dispenser machine, please learn teaching mode operation according to the following chapters.

 

 

Why us

 

1.Engineers available to service machinery oversea. 

Engineers are available to be sent to freign countries to do machinery training and offer technical support.
 

2.Mature technique & forerunner to process makes high quality machinery. 
 

As largest manufactory in South China, we have 12 years experience on PCB separator machines and soldering machines. pcb router machine
 

Our R&D team continuously upgrade the existing machines to meet the market development trend.
 

3.Effective customer service. pcb router machine
 

All of us together are stronger and wiser than any one of us individually. To succeed, we must assume responsibility, cooperate with fellow associates and withdepartments, effectively comminicate with one another, foster enthusiam and participate in decision-making. To be seay reachable by customers and provide prompt replies to solve their problems and create value for customers.
 

4.One year warranty for the machines except accessories. b router machine
 

Robust frame construction and Japanese steel blades obtained good appraise and recognized by and oversea clients. We offer parts for replacement under warranty free of charge, clients only need to bear freight charge.
 

Our mission:
 

Ongoing PCB industry PCB separator technological innovation, to create greater value, allowing customers to success
 

Our Vision:
 

PCB industry to become the world's leading solution providers PCB separator. pcb router machine
 

 

اطلاعات تماس
Dongguan Chuangwei Electronic Equipment Manufactory

تماس با شخص: Alan Cao

تلفن: +8613922521978

ارسال درخواست خود را به طور مستقیم به ما (0 / 3000)